- 有多种 60 磅（27 千克）、120 磅（54 千克）及 400 磅（181 千克）泵的长度和 60 磅（27 千克）及 90 磅（41 千克）容器可供选择，可适合所有越野设备
- 为基于注入器或分流阀的系统提供预配置泵套件，提供最大灵活性
- 可选 Graco 控制器、液面指示器、压力开关、随动盘和鼓盖，让您准确控制系统
- 内置便捷压力和流量控制
- 液压控制模块 - 所有控制装置于一体，便于设置和维护系统
欢迎光临梯瑞卡流体控制设备（四川）有限公司！
Chinese
欢迎光临梯瑞卡流体控制设备（四川）有限公司！
Chinese
| 5:1 Dynastar Pump Module | |
| Maximum hydraulic input pressure | 241 bar, 24 MPa |
| Pump wetted parts | See manual 308156 |
| Vent valve wetted parts | See manual 309099 |
| Reservoir wetted parts | steel, buna–n rubber |
| Maximum delivery | 119 in³/min, 1952 cm³/min at 3 gpm hydraulic flow rate |
| Hydraulic pressure operating range | 55 to 83 bar, 5.5 to 8 MPa |
| Hydraulic flow rate operating range | 1.9 to 11.4 lpm |
| Lubricant outlet pressure range | 172 to 241 bar, 17 to 24 MPa |
| Reservoir overflow port size | 1/2 npt |
| Reservoir fill port size | 1/2 npt |
| Hydraulic inlet port size | 3/8 in nps swivel |
| Hydraulic tank line size | 3/4 in nps swivel |
| Lubricant outlet port size | 1/2 nps swivel |
| Grease capacity | 90 lb |
| Mounting holes for pump module | Six 7/16 in holes on 13 7/8 in bolt circle |
| Reservoir diameter | 324 mm |
| Pump module height | 959 mm |
| Electrical requirements | Timed 24 VDC signal |
| Electrical power requirements | 14.7 Watts |
| Filtration (hydraulic fluid) | 10μ (microns) or better |
| Sound pressure (Reading taken with pump operating at 66 cycles per minute. Measured per CAGI–PNEUROP, 1971) | 77 dB (A) |
| 10:1 Dyna-Star Pump Module | |
| Maximum hydraulic input pressure | 240 bar, 24.0 MPa |
| Pump wetted parts | See manual 312350 |
| Vent valve wetted parts | See manual 309099 |
| Reservoir wetted parts | Steel, buna-n rubber |
| Maximum delivery @ 60 cpm | 570 cm³/min |
| Regulated hydraulic pressure operating range | Models: 247444, 247574, 247456, 247457, 247970: 1.7 to 2.4 MPa, 17.0 to 24.1 bar, Models: 247706, 247707: 1.7 to 3.1 MPa, 17.0 to 31.0 bar |
| Hydraulic flow rate operating range | 1.9 to 11.4 lpm |
| Maximum hydraulic fluid temperature | 93.33°C |
| Lubricant outlet pressure range | Models: 247444, 247574, 247456, 247457, 247970: 17.0 to 24.0 MPa, 170 to 240 bar, Models: 247706, 247707: 17.0 to 31.0 MPa, 170 to 310 bar |
| Reservoir overflow port size | 1/2 in npt |
| Reservoir fill port size | 1/2 in npt |
| Hydraulic inlet port size | 3/8 in nps swivel |
| Hydraulic tank line size | 3/4 in nps swivel |
| Lubricant outlet port size | 1/2 in nps swivel |
| Grease capacity | Model 247444, 247707: 41 kg, Model 247574, 247706: 27 kg |
| Mounting holes for pump module | six, 7/16 in holes on 13 7/8 in bolt circle |
| Reservoir diameter | 324 mm |
| Pump module height | Model 247444, 247707: 1086 mm, Model 247574, 247706: 893 mm |
| Electrical requirements | Timed 24 VDC signal |
| Electrical power requirements | 14.7 Watts |
| Filtration (hydraulic fluid) | 10μ (microns) or better |
| Sound Pressure (reading taken with pump operating at 66 cycles per minute. Sound pressure measured per CAGI-PNEUROP, 1971) | 77 dB(A) |
