- 便于观察的顶置循环钻孔指示器，有助于快速确认注入器是否正常运转
- GL-11 注入器调整范围为 0.05 立方英寸至 0.5 立方英寸（0.8 至 8.2 立方厘米）
- 工作压力范围为 1000 至 3500 磅/平方英寸（69 至 241 巴），可提供最佳性能，润滑脂等级最高为 NLGI #2
| GL-11 Injector | |
| Maximum Working Pressure | 241 bar, 24 MPa |
| Minimum Operating Pressure | 69 bar, 6.9 MPa |
| Suggested Operating Pressure | 172 bar, 17 MPa |
| Reset Pressure | 41 bar, 4.1 MPa |
| Output Volume Per Cycle | Adjustable: 0.050 to 0.500 in³ (Maximum adjustment setting is when adjusting screw (3) is just making contact with indicator pin (8) with no inlet pressure. Turn adjusting screw clockwise (in), to reduce output. To adjust, loosen lock nut (4) and turn adjusting screw (3) the number of turns indicated on the GL-11 Volume Adjustment Table to obtain the desired volume. Tighten lock nut (4) when desired volume setting is reached) |
| Wetted Parts | Carbon steel, Stainless steel, Copper, Fluoroelastomer |
| Recommended fluids | Lubricant: NLGI 000 - NLGI |
| Inlet | 1/2 in - 14 npt |
| Outlet | 1/4 in - 18 npsf |
| Outlet | 1/8 in - 27 npsf |
