- GL-1 注入器为歧管系统提供独立式和替换式注入器，可轻松进行定制满足各种工况
- 便于观察的顶置循环钻孔指示器，有助于快速确认注入器是否正常运转
- GL-1 注入器调整范围为 0.008 立方英寸至 0.08 立方英寸（0.13 至 1.31 立方厘米）
- 工作压力范围为 1000 至 3500 磅/平方英寸（69 至 241 巴），可提供最佳性能，润滑脂等级最高为 NLGI #2
| GL-1 Injectors | |
| Maximum operating pressure | 241 bar24 MPa |
| Suggested operating pressure | 172 bar 17 MPa |
| Reset pressure | 41 bar 4.1 MPa |
| Output volume per cycle | adjustable: 0.008 to 0.08 in³ |
| Wetted parts | carbon steel, stainless steel, copper, fluoroelastomer |
| Recommended fluids | N.L.G.I. #2 grease down to 0°C |
| GL-1 HCP (High Corrosion Protection) Injectors | |
| Maximum operating pressure | 24.1 MPa, 241 bar |
| Suggested operating pressure | 17.2 MPa, 172 bar |
| Reset pressure | 4.1 MPa, 41 bar |
| Output volume per cycle | adjustable: 0.008 to 0.08 cubic inches |
| Wetted parts | carbon steel, stainless steel, fluoroelastomer |
| Recommended fluids | N.L.G.I. #2 grease down to 0°C |
