- 设计便捷，歧管直接安装在 Graco 标准系列渐进式分流阀组装体正面
- 止回阀设计防止润滑油管线被压碎或轴承堵塞时，油被压入空气系统
- 空气与油在流体出口止回阀后混合，防止空气流回油源系统
- 完整套件，包括歧管、空气传感器和止回阀，易于安装
| Air Over Oil Manifold Assembly | |
Metric | |
| Maximum Air Working Pressure | 1.7 MPa, 17 bar |
| Maximum Fluid Working Pressure | 1.7 MPa, 17 bar |
| Lubricant | 2500 sus |
| Air Inlet | 1/8 NPT female |
| Maximum Operating Temperature | 93° C) |
| Material | anodized aluminum, zinc plated steel, stainless steel, chrome alloy steel, fluorocarbon |
| Air Sensor | |
| Air Connection | 1/8 NPT male |
| Electrical Connection | DIN43650A, PIN 1 - COM, PIN 2 - Not used, PIN3 - Normally Open |
| Maximum Pressure | 1.7 MPa, 17 bar |
| Fixed Setpoint | .24 MPa, 2.4 bar |
| Setpoint Direction | Falling |
| Circuit Form | SPST-NO (below 35 psi) |
| Current Rating | 5A @ 250 VAC. 5A @ 30 VDC (resistive) |
| Diaphragm Material | Buna-N |
